Welcome to Pennybuying.com! Worldwide Free Shipping

CNC Kit 4 Axis 3.5A TB6560 Driver & 4 x Nema 17 Stepper Motor 48oz-in + P.A +Interface Board

Be the first to review this product

Availability: In stock

$202.98
OR

Quick Overview

Worldwide Free Shipping

CNC Kit 4 Axis 3.5A TB6560 Driver & 4 x Nema 17 Stepper Motor 48oz-in + P.A +Interface Board

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

 

Interface  Board:

Features:

 


High performance, cost-effective.

To manually control the stepper motor, both of the standard and professional drivers have been equipped with the display panel and control pad.

Automatically identify both of the computer and control pad, functions of the computer and control pad can be switched intelligently for each other without any interference.

Display panel can real-time trail the running path of G-Code on the computer or input by the control pad, and then completely and synchronously display the changing of MAXIMUM FOUR axis'(X, Y, Z A axis etc.) values on its screen, it is completely synchronous with the values’ changing on the FOUR coordinates of Mach3.

Both of the standard version and professional version are compatible with the Mach2, Mach3(Default Software), LinuxCNC(EMC2), KCAM4 CNC Software, etc.. Besides, the professional version also can automatically trail the path running path of G-Code from the CNC software (e.g. Mach3, EMC2, KCAM4, etc.) of the computer and record the G-code into the memory chip; Easy to repeatedly run the G-code to control the stepper motors without computer.

The professional version also supports manual programming via the control pad, as long as input the required values on one axis and record them in the memory chip of the driver, and then run these recorded values to drive the axis to make linear motion, widely used on RBI machine, Conveyor and so on.

Automatically finish Tool-settings on X, Y, Z Axis via the control pad, without the support of the computer.

Two ways to get power, 5V DC power supply or USB port to get power from PC directly.

Compatible with all the 2 phase, 3 phase and 4 phase microstep drivers in the market.

Automatic circuit protections function when the wirings between the breakout board and microstep drivers are incorrect..

Two-stage signal processing, smooth signal transmission, powerful anti-jamming.

With Relay output control interface, available to control the spindle motor, air pump, water pump, etc...

5 types of input control in manual control interface, to set Limit, Estop, Midpoint-Setting, Cutter-presetting/Tool-Setting etc...


 
Applications: 

 


Suitable for a wide range of 2-phase and 3-phase microstep drivers in the market, such as M542, M542H, MA860H, 2MA2278, 2M542, 2M860, 2M982, DM542, DM860, 3M565, 3MA860, 3MA2290 etc...

For advising, such as brand, architechture mould, badge, nameplate, display boards, doorplate, furniture decoration, etc.It can be used in various kinds of machines, such as X-Y tables, labeling machines, laser cutters, engraving machines, pick-place devices, and so on.

This breakout board is just a interface board, NOT a stepper driver board, it must work together with the microstep drivers(eg. MA860H etc..) to control the stepper motors. So, it CANNOT control the stepper motors solely.
 

 

 
 
 
 
TB6560  Motor Driver Controller:

Overview


HY-DIV168N-3.5A subdivision-type two-phase hybrid stepping motor drive using DC 12 ~ 36V power supply, suitable for drive.

Two-phase hybrid stepping motor dynamic voltage 12 to 36V, the current is less than 3.5A outer diameter of 35 to 86 mm. This drive using the drive's current loop subdivision control, the motor torque ripple is very small, low-speed running is very smooth, almost no vibration and noise. High-speed torque is much higher than other two-phase drive, high positioning accuracy. Widely used in the engraving machine, CNC machine tools, packaging machinery and other high resolution requirements on the device.

The main features



1 average current control, two-phase sinusoidal current drive output

2 DC 12 ~ 36V power supply, the internal integration of 12V and 5V regulator
3 optically isolated signal input / output
4 overvoltage, undervoltage, overcurrent, and white short-circuit protection
5 4 file segmentation and automatic half-streaming capabilities up to 16 segments
4 file output phase current settings
7 high starting speed
8 high-speed torque

一, the electrical parameters



Input voltage DC 12 ~ 36V input

The input current of 1 to 4 amps, select the drive a stepper motor.
Output current of 0.5A ~ 3.5A
Temperature Operating Temperature -10 to 45 ℃; Storage temperature -40 ℃ to 70 ℃
Humidity not condensing, not drops
Gas prohibit combustible gas and conductive dust
Weight 200 grams

二、Control signal interface



Figure 1 is a wiring schematic of the drive

1, the definition of control signals
PUL +: step pulse signal is input side or the positive pulse signal input positive terminal
PUL-: the negative input of the negative input pulse signal or a positive pulse signal
DIR +: stepping direction signal input to the positive terminal or negative pulse signal input to the positive terminal
DIR -: stepping direction signal input of the negative side or reverse step pulse signal input negative terminal
EN +: offline can reset signal input side is
EN-: offline can reset signal input negative terminal
Offline enable signal is active, reset drive failure to prohibit any pulse, the output of the drive
Power component is turned off, the motor holding torque.
2、Control signal connections
PC control signal can be high, also can be low effective. When active high, the control signal
The negative side together as a signal to active low, positive side of all control signals together as a signal common.
 
 
 
 
 Nema17 Stepper Motor:

 

Model
Step angel (°)
Motor Length L(mm)
Rate Voltage (V)
Rate Current (A)
Phase
Resistance (Ω)

Phase Inductance (mH)
Holding Torque (N.cm)
Lead Wire (NO.)
Rotor Inertia (g.cm2)
Detent Torque (N.cm)
Motor Weight (kg)
17HS8403N
1.8
48
3.1
2.5
1.25
1.8
48
4
68
2.8
0.36
 
 
A902A
 
 

S-150-12 12VDC 12.5A Regulated Switching Power Supply:


Specification:

- DC LED Power Supply S-150-12 
- Output: 12VDC 12.5A
- Input Current:115V 2.5A
                     230VAC 1.25A
- Switching, Mounting Type DIN Rail
- Input Voltage:100-240VAC
- 110V/220V is selected by switch before power on;
-  Efficiency:71%;
- Leakage current: <0.5mA/240VAC;
- Adjustable range for DC voltage:+10,-5%;
- Setup,rise,hold up time: 200ms, 100ms, 30ms;
- Working temperature: -10C~+60 C(refer to output derating curve),
- Humidity:20%~90%RH;
- Standards: CE   

Package list:
 
 
 
1 x Intelligent 5 Axis Breakout Board

1 x Intelligent Control Pad 

1 x LCD Display Panel (Build-in)  

1 x DB25 Parallel Cable  


1 x USB Power Cable 


1 x CD
 
4 x 17HS8403N Nema17 Stepper Motor  
 

 

4 x TB6560 Stepper Motor Driver 1.5A-3A

 

1 x Switch Power Supply S-150W-12V

 

 

 
 
 

 

 

 



 

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.