Welcome to Pennybuying.com! Worldwide Free Shipping

CNC 1 Single Axis TB6560 3.5A Driver Controller F Two Phase Hybrid Stepper Motor

Be the first to review this product

Availability: In stock

$21.90
OR

Quick Overview

Worldwide Free Shipping

CNC 1 Single Axis TB6560 3.5A Driver Controller F Two Phase Hybrid Stepper Motor

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

Overview

 


HY-DIV168N-3.5A subdivision-type two-phase hybrid stepping motor drive using DC 12 ~ 36V power supply, suitable for drive


Two-phase hybrid stepping motor dynamic voltage 12 to 36V, the current is less than 3.5A outer diameter of 35 to 86 mm. This drive using the drive's current loop subdivision control, the motor torque ripple is very small, low-speed running is very smooth, almost no vibration and noise. High-speed torque is much higher than other two-phase drive, high positioning accuracy. Widely used in the engraving machine, CNC machine tools, packaging machinery and other high resolution requirements on the device.


The main features



1 average current control, two-phase sinusoidal current drive output


2 DC 12 ~ 36V power supply, the internal integration of 12V and 5V regulator
3 optically isolated signal input / output
4, overvoltage, undervoltage, overcurrent, and white short-circuit protection
5 4 file segmentation and automatic half-streaming capabilities up to 16 segments
4 file output phase current settings
7 high starting speed
8 high-speed torque

 


一, the electrical parameters


Input voltage DC 12 ~ 36V input


The input current of 1 to 4 amps, select the drive a stepper motor.
Output current of 0.5A ~ 3.5A
Temperature Operating Temperature -10 to 45 ℃; Storage temperature -40 ℃ to 70 ℃
Humidity not condensing, not drops
Gas prohibit combustible gas and conductive dust
Weight 200 grams

 

 


二、Control signal interface


Figure 1 is a wiring schematic of the drive

1, the definition of control signals
PUL +: step pulse signal is input side or the positive pulse signal input positive terminal
PUL-: the negative input of the negative input pulse signal or a positive pulse signal
DIR +: stepping direction signal input to the positive terminal or negative pulse signal input to the positive terminal
DIR -: stepping direction signal input of the negative side or reverse step pulse signal input negative terminal
EN +: offline can reset signal input side is
EN-: offline can reset signal input negative terminal
Offline enable signal is active, reset drive failure to prohibit any pulse, the output of the drive
Power component is turned off, the motor holding torque.
2、Control signal connections
PC control signal can be high, also can be low effective. When active high, the control signal
The negative side together as a signal to active low, positive side of all control signals together as a signal common.
 
 
 Click here to download the manual !
 
 
Package list:
 
1 X One Axis TB6560 3.5A Stepper Motor Driver.
 

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.