Welcome to Pennybuying.com! Worldwide Free Shipping

2Pcs BNC 200MHz Oscilloscope Scope Clip Probe P6200 Kit 1.2m Compensation 8-35P

Be the first to review this product

Availability: In stock


Quick Overview

Worldwide Free Shipping

2Pcs BNC 200MHz Oscilloscope Scope Clip Probe P6200 Kit 1.2m Compensation 8-35P

Double click on above image to view full picture

Zoom Out
Zoom In

More Views


Products tested and found to comply with IEC1010 standard.
Interface uses standard BNC, Universal and all oscilloscope interface.
Attenuation ratio: 1:1 / 10; 1 dual-purpose switch
Attenuation error: ± 1%
Switching times: more than 5000 times
Detailed parameters:
Distinction: the simultaneous measurement of the two-channel, in order to distinguish the two probes, the ring of the BNC and the different colors of the test terminal to distinguish between the two channels.

Cable diameter: 3.2 ± 0.1 mm

The cable bending frequency: 300g pull, bending angle 0-180 degrees, bending Lou greater than 10000.

1KHz square wave distortion: ≤ 1% (1KHz square wave signal in the test, the oscilloscope display 5 grid distortion is less than 1% of the signal amplitude)

System bandwidth: in 10:1 the state, the bandwidth reach 0-200MHz (measured reach 220MHz)

1:1 state, bandwidth 0-6MHz (measured reach 10MHz)

Rise time: 10:1 state, the rise time ≤ 1.85ns (measured reached 1.7ns)

1:1 state, the rise time ≤ 56ns (measured reached 35ns)

1MHz square wave impulse: ≤ 5% (in test standards 1MHz square wave signal, the oscilloscope display the 5 grid does not exceed 5% of the signal amplitude on impulse)

Maximum input voltage: ≥ 600V (DC + ACp-p) (measured reach 1000Vpck)

Safety standards: CAT Ⅱ 1000V CAT Ⅲ 600V

Input resistance: 10MΩ (the input impedance 1MΩ match the oscilloscope not with 10MΩ ScopeMeter, multimeter connection, or will lead to test results expand 10 times)

Input capacitor: 10 x (14-18P), 1 × (120P) This test is presented in the signal frequency of 100KHz sinewave capacitance value)

Compensation range :8-35P for the vast majority of general-purpose analog digital oscilloscope on the market

Compensation adjustment: BNC end capacitance adjustment effectively reduce the oscillation of signal transmission distortion

Length: 1.2m (the distance between the test needles to BNC)
Operating Temperature: -10 ~ 50 ℃ 
Storage Temperature: -20 ~ 75 ℃
Relative Temperature: ≤ 85%
Packing List:
2 X Oscilloscope Probe
4 X Color ring
2 X Protective cap
1 X Manual

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.